Dodge Challenger Concept, 2006

In creating the new Dodge Challenger concept car the designers at Chrysler Group�s West Coast Pacifica Studio knew they had a rich heritage to draw upon. They also knew they had an obligation to get it right.

Designing the New Dodge Challenger. Being key to the image, getting the right proportions was critical. The Challenger concept sits on a 116-inch wheelbase, six inches longer than the original. But its width is two inches greater, giving the concept car a squat, tougher, more purposeful persona.

The signature side view accent line is higher up on the body, running horizontal through the fender and door and kicking up just forward of the rear wheel.

In section the upper and lower body surfaces intersect and fall away along this line, which has just a whisper of the original car�s coved surfacing.

The five-spoke chrome wheels, 20-inch front and 21-inch rear, are set flush with the bodyside, giving the car the powerful muscular stance of a prizefighter eager to challenge the world. Wheel openings are drawn tightly against the tires, with the rearward edges trailing off. To emphasize the iconic muscularity, the designers added plan view �hip� to the rear quarters.

One of the key characteristics of the original car the designers wanted to retain was the exceptionally wide look of both the front and back ends. To achieve this the designers increased both the front and rear tracks to 64 and 65 inches respectively, wider than the LX, wider even than the 1970 model. To realize the long horizontal hood the designers deemed essential, the front overhang was also increased.

Bumpers are clean (no guards), body-color and flush with the body. �This is something we would have loved to do on the original Challenger,� said Jeff Godshall, who was a young designer in the Dodge Exterior studio when the first Challenger was created, �but the technology just wasn�t there. With the Challenger concept, however, the Pacifica Studio designers are able to realize what we wanted in our perfect world.�

The hood reprises the original Challenger �performance hood� and its twin diagonal scoops, now with functional butterfly-valve intakes. Designed to showcase the modern techniques used in fabricating the car, what look like painted racing stripes are actually the exposed carbon fiber of the hood material.

The Challenger concept is a genuine four-passenger car. Compared to the original, the greenhouse is longer, the windshield and backlite faster, and the side glass narrower. All glass is set flush with the body without moldings, another touch the original designers could only wish for. The car is a genuine two-door hardtop - no B-pillar - with the belt line ramping up assertively at the quarter window just forward of the wide C-pillar.

Exterior details one might expect, like a racing-type gas cap, hood tie-down pins, louvered backlite and bold bodyside striping, didn�t make the �cut,� the designers feeling such assorted bits would detract from the purity of the monochromatic body form. But tucked reassuringly under the rear bumper are the �gotta have� twin-rectangle pipes of the dual exhausts.

The Interior. In contrast to the bright Orange Pearl exterior, the interior is a no-nonsense, �let�s-get-in-and-go� black relieved by satin silver accents and narrow orange bands on the seat backs. �Though the 1970 model was looked to for inspiration, we wanted to capture the memory of that car, but expressed in more contemporary surfaces, materials and textures,� said Alan Barrington, principal interior designer. As with the original car, the instrumental panel pad sits high, intersected on the driver�s side by a sculpted trapezoidal cluster containing three circular in-line analog gauge openings.

�We designed the in-your-face gauge holes to appear as if you are looking down into the engine cylinders with the head off,� relates Barrington. These are flanked outboard by a larger circular �gauge� that is actually a computer, allowing the driver to determine top overall speed, quarter-mile time and speed, and top speed for each of the gears.

With its thick, easy-grip rim, circular hub and pierced silver spokes, the leather-wrapped steering wheel evokes the original car�s �Tuff� wheel, as does the steering column �ribbing.� The floor console, its center surface tipped toward the driver, is fitted with a proper �pistol grip� shifter shaped just right to master the quick, crisp shifts possible with the six-speed manual �tranny.�

Inasmuch as the original Challenger was the first car to have injection-molded door trim panels (now common practice), the doors received special attention.

�We imagined that the door panel was a billet of aluminum covered with a dark rubberized material,� Barrington relates. �Then we cut into it to create a silver trapezoidal cove for the armrest.�

Although the flat-section bucket seats of the original Challenger didn�t offer much support for aggressive driving, the front seats in the Challenger concept car boast hefty bolsters much like those found on Dodge�s famed SRT series cars. The trim covers� horizontal pleats or �fales� provide just a hint of that �70�s� look.

Rethought, reworked and redesigned, the Challenger concept car offers iconic a HEMI-powered performance coupe derived from a classic American muscle car.